CarTFT.com
M200 Enclosure
- Up to two 2.5" drives
- Bootable (IDE) Compact-Flash
- PWR button and LED
- Works with any picoPSU (not included)
- Size 20cm (w) x 5.4cm x 24cm
The M200-Enclosure is a versatile mini-ITX enclsosure designed for embedded applications where CDROM drives are not required. The M200-Enclosure fits any type of mini-ITX board with standard back I/O shield. Not recommanded for EPIA 800, EPIA 5000 and EPIA CN series because of the different USB header pinout. The M200-Enclsoure will work with up to two IDE or SATA 2.5" disk drives (disk drive cable adapter not included).
The M200-Enclsosure is compatible with an entire range of DC-DC picoPSU power sup
[more]
Please login for creating product ratings.
from sgkini am 30.03.2008
| 
| See all my comments
from captivo am 12.03.2008
|
| See all my comments
from tommycartfct am 31.01.2008
|
| See all my comments
BACK
1
2
3
4
5
6
7
Forward
Your rating: 
Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating.
If you want you also can leave a comment.
Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And
you can benefit from reports other customers are giving.
In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters)
on your account. The credit will be substracted automatically on your next order !
We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders).
"Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.
Customer ratings:
 Average rating, based on 31 ratings |
from sgkini am 30.03.2008
|
| See all my comments
I am using this case for my car PC along with Via EN 1500 and 2.5 " Hard disk. Had some problem with the front USB panel cable length and the connector. But used a general PCB and a 10 Pin FRC to connect the USB and works just fine. Along with M3-ATX 6-24V DC/DC (125 Watt)(PicoPSU) its just great for Car PC Project.
from captivo am 12.03.2008
|
| See all my comments
houses a lot reduced, are successful to make it to enter in 2 din.
from tommycartfct am 31.01.2008
|
| See all my comments
I'm using this case for a disk-less mini-itx firewall
built around VIA Epia-LT10000. The cpu-heat sink on the epia
board takes so much space that there is no room for hard drives.
If you want this config with hard drives I suggest you go
for the M300 Enclosure instead. I'm very pleased with the M200 enclosure,
it suits my needs and comes with a CF to IDE adapter.
AC Power adapter (12V, 5A, 60W)
110/230V
AC Power adapter (12V, 7A, 84W)
110/230V
High performance hook-and-loop tape (30cm x 15cm) [self-adhesive] *new*
![High performance hook-and-loop tape (30cm x 15cm) [self-adhesive] *new*](https://www.cartft.com/image_db/CAT_Klettband.jpg)
Self-adhesive !
High quality !
High performance !
Powerful !
M3-ATX 6-24V DC/DC (125 Watt) [picoPSU-format !]
![M3-ATX 6-24V DC/DC (125 Watt) [picoPSU-format !]](https://www.cartft.com/image_db/CAT_M3-ATX.jpg)
Like M2-ATX, but smaller !
Shutdown controller
Automotive ATX PSU
Survives engine cranks
Nice case good look disign ice for a media center