0€

CarTFT.com: Professional CarPCs and Displays

«   Change to: MiniPC.de – Small, flexible, powerful

Sprache ändern:

Deutsch
Shop for mobile PC- and GPS-solutions

Shop for mobile PC- and GPS-solutions

Product comments of grigoridav

Car-PC Intel D2700DC (Intel Atom 2x 2.13Ghz CPU, HDMI) [<b>FANLESS</b>] Intel D2700DC (Intel Atom 2x 2.13Ghz CPU, HDMI) [FANLESS]
 | 10.06.2013
1. There is no driver available for video accelerator on Windows XP. Using Intel EMGD utility, i got no success to make working the DVI output.
2. The BIOS config interface is not good at all.
3. The INTEL CD with drivers does not work on French version of XP => manual install
4. I did not got yet success to have power LED working with this board on M350.

The only plus = it is silent.

Car-PC picoPSU-80 DC/DC PC ATX power supply (Fanless, 80 Watt) picoPSU-80 DC/DC PC ATX power supply (Fanless, 80 Watt)
 | 10.06.2013
Just it would be good if precise in RED that it works only with 12V power supply. It shut down at 13.5V, so will not work if you wish to use power supply form DELL, HP, etc that are higher voltage.

Car-PC AC Power adapter (12V, 7A, 84W) AC Power adapter (12V, 7A, 84W)
 | 10.06.2013
Just wonder why they do not include the power cord. The good news: the power cord for HP laptop power supply fit the connector.

Car-PC Mitac PD10BI (Intel DN2800MT2) Rev.2 Half-Height (Intel Bay Trail Celeron  J1900 4x2.42Ghz CPU, 10-19VDC) [<b>FANLESS</b>] Mitac PD10BI (Intel DN2800MT2) Rev.2 Half-Height (Intel Bay Trail Celeron J1900 4x2.42Ghz CPU, 10-19VDC) [FANLESS]
 | 15.07.2014
Hello,
1. It is not 4x2.42GHz as written in header. It sound to be 4x1.99GHz (centos: /proc/cpuinfo)
2. If you wish to use this motherboard with M350 case, take care ! The M350 front POWER SW and POWER LED cables are too short to reach the connectors on motherboard. It sounds the adapter kit should be used.
3. The low voltage RAM should be used (?)
4. Failed graphical mode during CentOS 6.5 x86_64 minimal install => cann't do custom partitioning during install
5. Mitac documentation is not explicit