| Casetronik Travla C134 Assembly Tutorial |
|
Please see before all the pictures ! (enlarge them by clicking on them)
|
 |
You can see the following components :
- Travla C134 Case
- Mainboard VIA M10000
- 2,5" Harddisk
- UltraSlim DDR RAM
- Slimline-to-IDE Adapter
- Slimline DVD Drive
|
 |
You can see what is included with delivery with the C134 :
- The casing
- an external 220V power supply
- round cable for connecting the harddrive to the mainboard
- cable for connecting the slimline-drive
- Slim-size replacement heat sink for the mainboard
- some screws
|
 |
The C134 after taking the cover off.
|
 |
The C134 after taking off the roof and the slimeline-drive-faceplate.
|
 |
The VIA M10000 and the slim-size replacement heat sink.
|
 |
Backside of the mainboard. You have to carefully press the two plastik-holders together and
press them through the board for taking them off.
|
 |
The board from top view, still with the old heat sink, which is to be replaced now.
|
 |
The old heat sink has been taken off.
|
 |
The remaining white heat grease has been removed carefully.
|
 |
Take off the foils from the new heat sink.
|
 |
The board after we put the new sink and the ram module on it.
|
 |
Slimline DVD Drive + Slimline-to-IDE Adapter.
|
 |
The adapter put on the drive back.
|
 |
Case basement of the C134.
|
 |
C134 after we have put the mainboard on it.
|
 |
In the hand you can see the 4 case connectors, which we have to stick on the board.
Upper right : Power-LED, Lower right first HDD-LED, then Power, then Reset.
(Please see the manual of the mainboard for reference)
|
 |
Board after we have connected the connectors.
|
 |
Connection cables for Front-USB and -Firewire has been connected to the board.
|
 |
Drive connection cables were put on the mainboard.
|
 |
The roof of the C134.
|
 |
Case-roof after we put the slimline drive into it.
|
 |
Please attend the 2 small screws for fixing the drive.
|
 |
Roof with added harddrive.
|
 |
Roof after we fixed the harddrive. Please only use 2 screws, because there are too few screws
in the scope of delivery of the Travla !
|
 |
We connected the cables to the drives. Please connect them correctly !
Slimline-Drive : Small black arrow on the connector is to be connected to the pin on the adapter which is marked with "1".
|
 |
The roof was screwed back on the C134.
|
 |
Put the cover on it and you are done !
|
