|
ReInstall Windows XP on CTFDINPC-1
|
|
By:
XaviMetal
Rank:
Starfleet Lieutenant, Junior Grade
Postings:
7
From:
n/a
|
Posted:
So Feb 07, 2010 - 12:20
Hello, I reached the "CTFDINPC-1 Indash Car-PC (1.2Ghz, 1GB RAM, 16GB Flash, IDE, AM / FM radio, Amplifier, GPS, WinXP)" I bought last week.
I need to reinstall Windows XP because I appear in many features Chinese and English language, and I use a CarPC software called inav3 "in Spanish and I want to make the whole system in Spanish too.
I booted from USB CD, Windows XP, but while booting the installation CD gives a blue screen error with the code 0x0000007B. Next, CarPC screen closes and the computer shuts down. If I try to turn back the LCD appears in the Message: Power Fail. This is solved if you unplug the voltage and plug in the overturn.
I think this error is because I must load the SATA controller of the mainboard via a USB floppy drive during boot and press F6. Is that correct? If so, you can send me the driver that I use?. Or I can make some emulacio of SATA in the bios? (I have not found)
I wanted a manual for reinstalling windows, but there is nothing documented on your site or in the user manual.
Thanks in advance.
Greetings
|
By:
admin
Rank:
Starfleet Vice Admiral
Postings:
463
From:
Germany
|
Posted:
So Feb 07, 2010 - 02:38
>I think this error is because I must load the SATA controller of the mainboard via a USB floppy
>drive during boot and press F6. Is that correct?
Actually it should be no problem to install Windows XP SP3 on the PC without needing any additional drivers.
USB CD/DVD drives often cause problems. It is a good idea to test all USB connectors of the PC.
eg. with CTFDINPC-1 you also can use the USB port which is hidden in the front.
|
|
By:
XaviMetal
Rank:
Starfleet Lieutenant, Junior Grade
Postings:
7
From:
n/a
|
Posted:
So Feb 07, 2010 - 02:45
hi!
No problem of CD / DVD, I installed windows 7 starter with the same CD / DVD without problems and no problems in installation and SATA drivers without problems.
A Request:
If someone has installed Windows XP SP2/SP3 successfully, could indicate their BIOS settings for SATA hard disk mode?
Thanks again
|
|
By:
XaviMetal
Rank:
Starfleet Lieutenant, Junior Grade
Postings:
7
From:
n/a
|
Posted:
So Feb 07, 2010 - 05:30
Hello again,
I've been trying to install windows xp all day without success.
I wanted to comment on the tests I've done.
1 - During the installation process begins: When you receive the "Press F6 to load SCSI / Raid Drivers" prompt, press F7 to bypass Advanced Configuration and PowerInterface (ACPI) detection.
It did not work.
2 - Format the HDD in FAT32 flash drive, with some use Booting from CD / DVD, copy the folder i386 Windows XP CD to c: and run the Winnt.exe, the installation starts but ..
Did not work either.
In all cases the CARPC always closes the screen and turns off the computer.
I hope some of you can help me or give me another idea ...
Thanks again to everyone.
|
By:
admin
Rank:
Starfleet Vice Admiral
Postings:
463
From:
Germany
|
Posted:
So Feb 07, 2010 - 08:55
What's the Service Pack level of your WinXP installation source ?
>No problem of CD / DVD, I installed windows 7 starter with the same CD / DVD without problems and >no problems in installation and SATA drivers without problems.
Did you installed Win7 on the CarPC for testing ?
|
|
By:
XaviMetal
Rank:
Starfleet Lieutenant, Junior Grade
Postings:
7
From:
n/a
|
Posted:
So Feb 07, 2010 - 09:45
From admin:
What's the Service Pack level of your WinXP installation source ?
>No problem of CD / DVD, I installed windows 7 starter with the same CD / DVD without problems and >no problems in installation and SATA drivers without problems.
Did you installed Win7 on the CarPC for testing ?
I used Windows XP SP2 and also SP3. I tried also with modified CD windows xp sp3 with sata drivers pack Via.
Install Windows 7 starter edition without any problem, to try another system since, with no windows xp I have managed to install it.
Any ideas?
Thanks |
By:
admin
Rank:
Starfleet Vice Admiral
Postings:
463
From:
Germany
|
Posted:
So Feb 07, 2010 - 09:47
Why don't you stay with Win7 ? It is faster anyway...
|
|
By:
XaviMetal
Rank:
Starfleet Lieutenant, Junior Grade
Postings:
7
From:
n/a
|
Posted:
Mo Feb 08, 2010 - 06:14
From admin:
Why don't you stay with Win7 ? It is faster anyway...
because the nav software i want to use don't work in w7 |
By:
admin
Rank:
Starfleet Vice Admiral
Postings:
463
From:
Germany
|
Posted:
Mo Feb 08, 2010 - 11:56
Which nav software do you want to use ?
|
|
By:
XaviMetal
Rank:
Starfleet Lieutenant, Junior Grade
Postings:
7
From:
n/a
|
Posted:
Mo Feb 08, 2010 - 12:35
From admin:
Which nav software do you want to use ?
Hi,
The program is the iNav3: http://www.inertinc.org/inav3/
Here you can see some screenshots: http://www.solocarputer.com/phpbb2/viewtopic.php?t=14280
It is freeware and Spanish. He says he works with windows 7 but I do not work.
By the way .. you have the CarPC itself that I CTFDINPC-1 Indash Car PC???
Greetings |
By:
admin
Rank:
Starfleet Vice Admiral
Postings:
463
From:
Germany
|
Posted:
Mo Feb 08, 2010 - 01:55
>you have the CarPC itself that I CTFDINPC-1 Indash Car PC???
What do you mean exactly ?
If you still want WinXP, then please apply for RMA and send us the PC + your Win CD.
We then will install it for you.
|
|
By:
XaviMetal
Rank:
Starfleet Lieutenant, Junior Grade
Postings:
7
From:
n/a
|
Posted:
Mo Feb 08, 2010 - 05:12
Hello
If you know how to do it, would not it be easier to tell me how to do it?
You have already seen that I have enough knowledge to do so, and would be very cruel, that after seeing all the type of test I have done, given me not the right solution.
I understand that cartft.com should give me some explanation if the user manual is no indication whatsoever of doing so ... then .. the CD of Windows XP (DELL) to what I want?
If I send you the computer will not solve anything, because in future cases may need to do it again.
Thanks
Forgive me if I do not understand, but not much English and I use the google translator.
|
