CarTFT.com
MHero-L-R enclosure (1x PCI, Slimline ODD) *new*
This beautiful enclosure for Mini-ITX and Micro-ATX can be equipped with every mainboard where CPU heatsink height does not exceed 5,5cm. Behind his slideable front bezel there are 2x USB ports, 1xMic, 1xLine-Out and the slimline drive bay for CD/DVD drives.
Because of the integrated ATX 120W power supply and the external 84W AC/DC adapter you fanless can power also systems with higher performance. For using the system as a car-pc you can exchange the internal PSU against a M2-ATX(-HV) Automotive power supply.
The PCI-riser card, which is in scope of supply, enables you to install a PCI card. On enclosure rear side you also can install 2x RS232 ports, 1x SATA an
[more]
This beautiful enclosure for Mini-ITX and Micro-ATX can be equipped with every mainboard where CPU heatsink height does not exceed 5,5cm. Behind his slideable front bezel there are 2x USB ports, 1xMic, 1xLine-Out and the slimline drive bay for CD/DVD drives.
Because of the integrated ATX 120W power supply and the external 84W AC/DC adapter you fanless can power also systems with higher performance. For using the system as a car-pc you can exchange the internal PSU against a M2-ATX(-HV) Automotive power supply.
The PCI-riser card, which is in scope of supply, enables you to install a PCI card. On enclosure rear side you also can install 2x RS232 ports, 1x SATA and 1x 4pol power.
Please login for creating product ratings.
from montel am 14.07.2012
| 
from 01778896541@gmx.de am 06.02.2012
|
| See all my comments
1
2
Forward
Your rating: 
Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating.
If you want you also can leave a comment.
Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And
you can benefit from reports other customers are giving.
In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters)
on your account. The credit will be substracted automatically on your next order !
We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders).
"Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.
Customer ratings:
 Average rating, based on 6 ratings |
from montel am 14.07.2012
|
Das ansprechende Gehäuse sieht nicht nur gut aus, es ist auch gut verarbeitet, bietet Platz für ein Mini-ITX-Board und mehrere 2,5"-Speichermedien. Ein Slim-LW würde ebenfalls noch reinpassen. Die "Schubblende" gibt auf jeden Fall was her - ich kann dieses Gehäuse nur empfehlen. Artikel wurde gut verpackt sehr schnell geliefert.
from 01778896541@gmx.de am 06.02.2012
|
| See all my comments
Tolles Gehäuse, Optisch sehr schön und auch gut verarbeitet. Habe es mir für meinen Schreibtisch gekauft. Passt sehr schön dort hin und braucht nicht soviel platz wie ein Tower. Habe ein Fujitsu D 2703-S Mainboard eingebaut aber leider erst zuspät erkannt das diese Board ein 24 V Netzteil benötigt. Was leider nicht in diesem Gehäuse verbaut ist. Somit musste ich mir noch ein zusätzliches Netzteil kaufen.
* An diese Stelle noch einmal ein dickes Lob an den Support von CarTFT. Die mir mit Kompetenter Beratung zur Seite standen*****
This case has a severe design flaw, it's upside down.
If you want to put the case on the table horizontally, you have two choices. One is the "proper" orientation where the motherboard would be at the bottom, and the CPU fan would blow air upwards. In that case, the sliding door will open downwards, towards the desk.
The other option is to flip the case around so the motherboard is at the top, hanging down, and only in that case can you open the sliding door. But now the DVD drive will be upside down, and the ventilation holes will be at the bottom. This is the wrong way to go, but is the only choice if you want to open the sliding door upwards.
This is one idiotic case. Opening the door downwards towards the desk. Was it so hard to do it properly and have it open upwards?