M3-ATX 6-24V DC/DC (125 Watt) [picoPSU-format !]

3D 360° View

Like M2-ATX, but smaller !
Shutdown controller
Automotive ATX PSU
Survives engine cranks

69.95 EUR
incl. 19% VAT, plus shipping
In Stock (302 pcs)
5 von 5 Sternen

107 ratings

M3-ATX is an intelligent vehicle ATX power supply. Designed to provide power and to control the ON/OFF switch of a motherboard based on ignition status, M3-ATX is a wide input (6-24V) ATX power supply capable of surviving tough engine cranks (down to 5.7V) as well as transient over-voltage situations.

M3-ATX has 8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown timing schemes. By removing all user-selectable jumpers, M3-ATX becomes a traditional PSU with no ignition control and it can be used in non-vehicle applications.

Even if your computer is totally OFF, a PC will still consume few hundered milliwatts, needed to monitor PC ON/OFF status. When the computer is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is few watts. No matter how big your battery is, it will eventually drain your battery in a matter of days.

While in deep sleep mode, M3-ATX constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down until battery levels reach safe levels again.

No more dead batteries, no more computer resets during engine cranks, along with multiple timing schemes, small formfactor and very competitive price makes the M3-ATX the premier solution for ATX vehicle power supply solutions.

M3-ATX comes equipped with ATX, HDD and Floppy cable harness, jumpers, faston connectors and 2 pin cables for motherboard ON/OFF switch. Just connect it to your 12V car / boat / RV battery and power up your PC.

Working from 8V Power input (6V for short time) !

The M3-ATX also is capable for P4(M)- and AMD-systems.
Scope of Supply:
- M3-ATX PSU
- Cable for mainboard (Remote-PowerOn)
- 3x cables f. Plus, Ignition Plus, Ground (Minus)

Data sheet	Download (PDF)
Data sheet	Print view
Manual [EN]	Download (PDF)
Manual [DE]	Download
Programming	Download

Please login for creating product ratings.

Your rating:

Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating. If you want you also can leave a comment.

Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And you can benefit from reports other customers are giving.

In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters) on your account. The credit will be substracted automatically on your next order !

We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders). "Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.

Customer ratings: Average rating, based on 107 ratings

from pg89 am 23.09.2009 |

| See all my comments

Super sache! Sehr platzsparend und die Leistung ist auch ausreichend.

from schlumpf79 am 23.09.2009 |

| See all my comments

Super Netzteil !!! Aus Platzgründen im ITX-Gehäuse habe ich mich für das M3-ATX Netzteil entschieden, eine gute Wahl wie ich finde und mit 125Watt mehr als ausreichend für das ITX-Board Intel "D945GCLF2" Preis- Leistung ist an der Stelle voll ok. Wer dieses jedoch an Intel-Boards betreiben möchte sollte den P4-Adapter direkt mitbestellen.

from Brovning am 27.08.2009 |

Am Anfang machte mir das M3-ATX so seine Probleme, doch nach genauem lesen der Bedienungsanleitung klappte auch das richtige Setzen der Jumper. Das Netzteil funktionierte nun 3 Monate, das heißt der Rechner bekam ein Power-ON Signal bei Zündung und ein Shutdown bei Zündung aus, doch jetzt bekommt er kein Zündung aus mehr, so dass ich immer manuell in den Shutdown gehen muss. Zumindest funktioniert der Power-On noch automatisch...
Werde das Netzteil bei Gelegenheit wohl einsenden müssen...

from Artificial am 14.08.2009 |

| See all my comments

What can i say... one of the best power supplies ever. Very powerful, survives engine cranks, etc. It is also very easy to connect it to a PC with serial cable for adjusting timings - very useful.

from Ph0enix am 11.08.2009 |

| See all my comments

An und für sich n super Netzteil, nur leider hat es seine Zeit gedauert bis es gemacht hat was es sollte. Hat am Anfang nicht auf Zündung reagiert. Probleme haben sich dann aber nach 2 Tagen rumprobieren in Luft aufgelöst. Funktioniert nun bestens und so wie es soll. Kann ich nur empfehlen. Für den Preis unschlagbar.