New. 2 years warranty.
Scope of supply :
- Kontron KT690/mITX Mainboard
- I/O shield
Form factor KT690/mITX, KT690/mITX-FW and KT690/mITX (BGA): mini ITX (170.18 x 170.18mm)
Processor • Support for Mobile AMD Sempron™, AMD Turion™ 64 and AMD Turion™ 64 X2
Mobile Processors for S1 socket. (KT690/mITX and KT690/mITX-FW only).
o 35W maximum TDP
o 6.4GB/s HyperTransport™ link, 800 MHz, 16bit/16bit
o Hypertransport™ 1.0 Tunnel (I/O Bus) speed of 800MHz
o Internal L1 cache of 128KB (Single core CPUs) / 128KB x2 (Dual core CPUs)
o Internal L2 cache of 128/256/512KB (Single core CPUs) / 512KB x2 (Dual
core CPUs)
o Processor technology of 65nm / 90nm
• Support for AMD SempronTM BGA Single Core 210U (KT690/mITX (BGA) only).
o 15W maximum TDP
o Up to 6.4GB/s peak HyperTransport™ link, 800 MHz, 16bit/16bit
o Internal L1 data cache 64KB + L1 instruktion cache 64KB
o Internal L2 cache of 256KB
o Processor technology of 65nm
• Support for AMD AthlonTM Neo X2 BGA Dual Core L325 KT690/mITX (BGA) only.
o 18W maximum TDP
o Up to 6.4GB/s peak HyperTransport™ link, 800 MHz, 16bit/16bit
o Internal L1 data cache 2x 64KB + L1 instruktion cache 2x 64KB
o Internal L2 cache of 2x 512KB
o Processor technology of 65nm
• DDR2 memory controller and bus interface
Memory • Dual Channel DDR2 memory architecture
• 2 pcs DDR2 SODIMM 200pin DRAM sockets onboard.
• Support DDR 400/533/667MHz unbuffered memory (PC2-3200/PC2-4200/PC2-5300)
• Support system memory from 1x 256MB and up to 2 x16GB (PT only up to 2x4GB
has been verified).
• ECC not supported
Chipset AMD Chipset consisting of:
• AMD M690T northbridge ( graphics tunnel)
• ATI SB600 southbridge (I/O hub)
Video • Integrated ATI Radeon™ X1200 graphics core
o CRT Out connector
o DVI-D connector (Digital only)
o Onboard LVDS connector
o TV-Out connector**
• Dual independent pipe support: Mirror and Dual Independent displays supported.
• Full DirectX® 9.0 support
• Maximum resolution of 2048x1536 @ 32bpp for a maximum pixel clock speed of
400MHz.
• LVDS interface supports dual channel, 24bit OpenLDI/ SPWG panels.
(
Audio Audio, 7.1 and 7.2 Channel High Definition Audio Codec using the Realtek ALC888 codec
• Line-out and Line-in
• Surround output: SIDE, LFE, CEN, BACK and FRONT
• Microphone: MIC1, MIC2
• CDROM in
• SPDIF Interface
Onboard speaker
I/O Control Winbond W83627DHG LPC Bus I/O Controller
Peripheral
interfaces
• Six USB 2.0 ports on I/O area
• Four USB 2.0 ports on internal pinrows
• Two Serial ports (RS232)
• One Parallel port, SPP/EPP/ECP
• One Floppy port
• Four Serial ATA-300 IDE AHCI interfaces
• One PATA 66/100/133 interface with support for 2 devices
• CF (Compact Flash) interface (KT690/mITX only) supporting CF type I and II.
(UDMA2 max.). Note that only one PATA device is supported when CF is used and
only by use of 40-wire cable (not 80-wire cable). Optionally use SATA devices.
• Two IEEE 1394-1995/ 1394a-2000 OHCI Firewire ports supporting speeds of 100
Mbits/s, 200 Mbits/s, and 400 Mbits/s (KT690/mITX-FW only)
• PS/2 keyboard and mouse ports
LAN
Support
• 2x 10/100/1000Mbits/s LAN using
o Realtek RTL8111B PCIe controllers on KT690/mITX and KT690/mITX-FW
o Intel® Hartwell 82574L PCIe controllers on KT690/mITX (BGA)
• RPL/PXE netboot supported. Wake On LAN (WOL) supported
BIOS • Kontron Technology / AMI BIOS (core version 8.00)
• Support for Advanced Configuration and Power Interface (ACPI 1.0b), Plug and Play
o Suspend To Ram (S3)
o Suspend To Disk (S4)
• Support for Cool’n’Quiet™
• Secure CMOS/ OEM Defaults, “Always On” power setting, Forced Boot device.
• Desktop Management Interface (DMI)
• Support for addition of System Locked Preinstallation (SLP) key in BIOS
• RAID Support (RAID modes 0, 1, and 10) (for Linux O/S limitations may apply)
• TPM onboard
Expansion
Capabilities
• PCI Bus routed to PCI slot(s) (PCI Local Bus Specification Revision 2.3)
o KT690/mITX: 1 slot PCI 2.3, 32 bits, 33 MHz, 5V compliant
• PCI-Express bus routed to PCI Express slot(s) (PCI Express 1.1a)
o KT690/mITX: 1 slot PCI-Express x16 with PCI-Express x8 support
• Mini PCI-Express routed to mini PCI-Express connector
Support for Mini PCI-Express modules with no components on backside.
• SMBus routed to FEATURE, PCI slot, PCI Express and mini-PCI Express connectors
• LPC Bus routed to TPM connector
• DDC Bus routed to LVDS and CRT connector
• 8 x GPIOs (General Purpose I/Os) routed to FEATURE connector
Hardware
Monitor
Subsystem
• Smart Fan control system, support Thermal® and Speed® cruise for three onboard
Fan control connectors: FAN_CPU, FAN_SYS and FEATURE
• Three thermal inputs: CPU die temperature, System temperature and External
temperature input routed to FEATURE connector. (Precision +/- 3ºC)
• Voltage monitoring
• Intrusion detect input
• SMI violations (BIOS) on HW monitor not supported. Supported by API.
Operating
Systems
Support
• Win7
• WinXP
• Windows Vista
• Windows 2003
• WinXP Embedded
• Linux: Feodora Core 8
Environmental
Conditions
Operating:
0°C – 60°C operating temperature (forced cooling). It is the customer’s responsibility to
provide sufficient airflow around each of the components to keep them within allowed
temperature range.
10% - 90% relative humidity (non-condensing)
Storage:
-20°C – 70°C
5% - 95% relative humidity (non-condensing)
Electro Static Discharge (ESD) / Radiated Emissions (EMI):
All Peripheral interfaces intended for connection to external equipment are ESD/ EMI
protected.
EN 61000-4-2:2000 ESD Immunity
EN55022:1998 class B Generic Emission Standard.
Safety:
UL 60950-1:2003, First Edition
CSA C22.2 No. 60950-1-03 1st Ed. April 1, 2003
Product Category: Information Technology Equipment Including Electrical Business
Equipment
Product Category CCN: NWGQ2, NWGQ8
File number: E194252
Theoretical MTBF:
234,251 hours or 26.7 years @ 40ºC ambient air temperature
135,169 hours or 15.4 years @ 60 ºC ambient air temperature
Restriction of Hazardeous Substances (RoHS):
All boards in the KT690 family are RoHS compliant.
Capacitor utilization:
No Tantal capacitors on board
Only Japanese brand Aluminium and solid electrolytic capacitors rated for 100ºC used
on board
Battery Exchangeable 3.0V Lithium battery for onboard Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR2032NL/LE, CR-2032L/BE or CR-2032L/BN
Expected minimum 5 years retention varies depending on temperature, actual
application on/off rate and variation within chipset and other components.
Approximately current draw is 3µA (no PSU connected).
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Please
login for creating product ratings.
Your rating:
Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating.
If you want you also can leave a comment.
Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And
you can benefit from reports other customers are giving.
In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters)
on your account. The credit will be substracted automatically on your next order !
We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders).
"Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.